Triumph Street Triple Moto2 Edition User Manual

WARRANTY
210
for all warranted parts replaced and
our labor reimbursement will be limited
to our recommended time allowances
for emission system repairs at the
geographically appropriate hourly labor
rate.
To obtain reimbursement from Triumph
Motorcycles America Limited for such
emergency repairs, you must keep
all failed parts and original receipts,
marked "paid," so you can present them
to an authorized Triumph dealer for
their inspection. Triumph Motorcycles
America Limited recommends that you
bring your motorcycle to an authorized
dealer for inspection to ensure that the
emergency repairs were done properly.
What is Covered by this
Emission Warranty
The emission control system warranty
covers the following "warranted parts"
only:
▼ Fuel injection/engine management
equipment including oxygen sensors
▼ Intake manifold
▼ Air cleaner box
▼ Spark advance/retard system
▼ Spark plugs (first 10,000 miles)
▼ Ignition coils
▼ Charcoal canister
▼ Cap, fuel tank
▼ Fuel/vapor separator (fuel tank)
▼ Vapor valve
▼ Rollover/pressure control valves
▼ If used on the above systems: hoses,
clamps, fittings, tubing, sealing
gaskets and mounting hardware.

Triumph Street Triple Moto2 Edition Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, inline 3-cylinder
Engine Capacity	765 cc
Max Torque	80 Nm @ 9, 500 rpm
Transmission	6-speed
Dry Weight	166 kg
Front Brakes	Twin 310 mm floating discs, Brembo Stylema 4-piston radial monobloc calipers
Rear Brakes	Single 220 mm disc, Brembo single piston caliper
Fuel Tank Capacity	15 litres
Frame	Aluminium beam twin spar
Wheels	17 x 3.5 in (front), 17 x 5.5 in (rear)
Front Suspension	Öhlins 43 mm NIX30 upside down forks, adjustable compression and rebound damping