31
General Information
Odometer/Trip Meter
1. B u t t o n A
2. Button B
3. Odometer/Trip meter display
4. Trip meter 1 display
5. Trip meter 2 display
Odometer
When the ignition is switched on, the
odometer will be displayed for 3 seconds
then the last selected trip meter will be
shown.
The odometer shows the total distance that
the motorcycle has travelled.
To access the odometer, with the motorcycle
stationary and in neutral press and release
button 'A' until set up is visible in the display
screen then press button 'B'. Press and
release button 'A' until odometer is visible.
To exit odometer, press and release
button 'A' until rEturn is visible then press
button 'B'. Trip 1 will be visible in the display
screen.
Trip Meter
Either trip meter shows the distance that the
motorcycle has travelled, trip time, average
fuel consumption, instantaneous fuel
consumption and average speed, all since the
trip meter on display was last reset to zero.
To access the trip meter information, turn the
ignition to the ON position. Press and release
button 'A' until the desired trip meter is
visible in the display screen.
Press and release button 'B' until the desired
display is visible. The display will scroll
through in the following order:
• Trip distance;
• Range to empty;
•Trip time;
• Average fuel consumption;
• Instantaneous fuel consumption;
• Average speed.
Each display provides the following
information all calculated since the trip meter
was last reset to zero:
Trip Distance
The total distance travelled.
Range to Empty
This is an indication of the probable distance
that can be travelled on the remaining fuel in
the tank.
Trip Time
The total time elapsed.
Average Fuel Consumption
An indication of the average fuel
consumption. After being reset the display
will show dashes until 0.1 miles/km has been
covered.
2
1
3
5
cfin
4
To Next Page
Loading...
Need help?
General
