Attach ground (green/yellow) and strain
relief (red) wires from the lamp plug to the
ground lug on the chamber. Secure both
wires with locking screw provided.
For Plus
models
only.
12
13
16
14
1511
Let water flow to one faucet or other water
outlet, then close the outlet and check for
leaks.
Proceed to Disinfecting The Water Lines.
Plug sensor into blue jack (Plus models
only).
Push safety
cap into
place.
Ground
lug
Locking
screw
Ground and
strain relief
wires
Outlet must be
protected by a
Ground Fault
Circuit Interrupter
(GFCI).
To Next Page
Loading...
