COMPUTER FUNCTIONS
FUNCTIONS AND OPERATIONS:
TIME: Displays the exercise time. If the exercise duration is not set, the time will count up from
00:00 to a maximum of 99:59 in increments of 1 minute. If the exercise duration is set, the
time will count down from the preset time to 00:00.
SPEED: Displays the current training speed. The maximum speed is 99.9 km/h.
RPM: Displays revolutions per minute. The display range is – 15 – 9999.
DISTANCE: Displays the accumulated distance from 0.00 to a maximum of 99.9 km/h. The user may
preset the target distance by using the up/down buttons. Each increment or decrement is
0.1 km between 0.00 – 99.00.
CALORIES: Displays the accumulated calories burnt during training from 0 – 9999 calories.
PULSE: The user may set a target pulse from 0 – 30 – 230. The computer buzzer will beep when
the actual heart rate is over the target value during the workout.
WATTS: Displays the current workout in watts. The display range is from 0 – 999.
MANUAL: Displays the manual mode workout.
USER The User can create a resistance level prole.
PROGRAM:
H.R.C: Displays the target heart rate mode.
WATT Displays the watt constant training mode.
PROGRAM:
Note: The Computer will enter into power saving mode, should the pedals not be used for 4 minutes. All the
settings and exercise data will be stored until used again.
To Next Page
Loading...
