What to do if there is no display on my Trojan PACE 380?
If there's no display on your Trojan Exercise Bike's console, first, detach the console and ensure the wire from it is securely connected to the wire from the Main Frame. Next, check that the batteries are correctly positioned and the battery springs are making proper contact. Finally, the batteries in the console may be dead, try replacing them with new ones.
Why is my Trojan PACE 380 squeaking?
If your Trojan Exercise Bike is making a squeaking noise during use, the bolts on the upright bike might be loose. Inspect all bolts and tighten any that you find are not properly secured.
Consult physician before exercise, stop if feeling unwell.
Set up on a level surface with adequate space and ventilation.
Attach front and rear stabilisers to the main frame using bolts and nuts.
Assemble the seat post, seat sliding tube, and seat onto the main frame.
Install console post, tension control knob, and connect wires.
Attach handlebar, console, and foot pedals to the assembled unit.
Details repair costs under warranty (free) and out of warranty (consumer expense).
General| Display | LCD |
|---|---|
| Resistance Type | Magnetic |
| Programs | 12 |
| Heart Rate Monitoring | Hand pulse sensors |
| Resistance Levels | Magnetic, 16 levels |
To Next Page
