7
PARTS LIST
No. Description Qty
1 Main Frame 1
2 Front Stabiliser (Ø60 mm) 1
3 Rear Stabiliser (Ø60 mm) 1
4 Idle Wheel Bracket 1
5 Seat Post 1
6 Seat Sliding Tube 1
7 Console Post 1
8 Handlebar (Ø25 mm) 1
9 U Bracket 2
10 Washer (Ø16 mm x Ø8 mm) 4
11 Washer (Ø20 mm x Ø10 mm) 1
12 Washer (Ø14 mm x Ø10 mm) 2
13 Big Washer (Ø16 mm x Ø6 mm) 1
14 Big Curved Washer (Ø20 mm x Ø8 mm) 4
15 Big Curved Washer (Ø25 mm x Ø8 mm) 4
16 Spring Washer (Ø6 mm) 2
17 Bolt (M8 x 70 mm) 4
18 Bolt (M10 x 50 mm) 1
19 Bolt (M8 x 15 mm) 4
20 Bolt (M8 x 18 mm) 1
21 Adjustable Bolt (M6 x 36 mm) 2
22 Bolt (M6 x 10 mm) 1
23 Screw (ST2.9 x 12 mm) 2
24 Screw (ST4.2 x 20 mm) 4
25 Screw (ST4.2 x 25 mm) 8
26 Phillips Self Tapping Screw (ST4.2 x 25 mm) 4
No. Description Qty
27 Nut (M8) 4
28 Nut (M6) 2
29 Nut (M10) 2
30 Cap Nut (M8) 4
31 Flywheel (Ø250 mm x 4 kg) 1
32 Axle Bush 2
33 Ball Bearing 2
34 Axle Sleeve I (15/16”) 1
35 Axle Sleeve II (7/8”) 1
36 Washer I (Ø24 mm x Ø40 mm x 3 mm) 1
37 Washer II (Ø23 mm x Ø34.5 mm x 2.5 mm) 1
38 Nut (7/8”) 1
39 Belt Pulley with Crank 1
40 Spring 1
41 Spacer (Ø12 mm x 1.5 mm x 20 mm) 1
42 Bearing (6000 ZZ) 2
43
Handlebar Foam Grip
(Ø24 mm x Ø30 mm x 550 mm)
2
44 Left Pedal 1
45 Right Pedal 1
46 Handlebar End Cap (Ø25 mm) 2
47 Cover Cap 2
48 Locking Knob 1
49 Hand Pulse Sensor with Wire (L = 750 mm) 2
50 Sensor Wire (L = 750 mm) 1
51 Left Chain Cover 1
52 Right Chain Cover 1
To Next Page
Loading...
