Trojan PRO-X 460 - Console Functions and Operations; Console Function Button Operation (Mode;Reset); Console Display Functions (Scan, Time, Speed, Distance, Calories); Console Notes and Battery Requirements

17
FUNCTION BUTTON:
MODE / RESET: Choose each function by pressing Mode key. Lock the current function
in Scan Mode by pressing the Mode key. Press Mode key and hold for 2
seconds to reset all function gures.
FUNCTIONS AND OPERATIONS:
SCAN: The sequence of display: TIME - SPEED - DISTANCE - CALORIES
Automatically scan through each mode in sequence of 6 seconds.
TIME: Accumulates workout time from 0:00 up to 99:59 minutes.
SPEED: Displays current training speed, the maximum is 999.9 km/h.
DISTANCE: Accumulates total distance from 0.0 Up to 999.9 km.
CALORIES: Accumulates calories consupmtion during training from 0.0 Cal to the
maximum 999.9 Cal.
(This data is a rough guide for comparison of different exercise sessions
which can not be used in medical treatment.)
NOTE:
1. All functions will be reserved and the Console LCD will shut off when no signal is being transmitted.
2. Monitor battery spec: 1.5 V um - 3 or AA (2 pcs).
3. If the Console display seems abnormal, re-install the battery and try again.
4. Batteries need to be replaced when the LCD display is weak.
CONSOLE FUNCTIONS