tronical TUNE PLUS - Reference Tuning; Firmware Version

D REFERENCE TUNING
Tune the guitar with respect to one maually tuned string as
reference
EXAMPLE: A piano is in tune with itself, but
slightly flat. Tune one string with respect to the
piano and make this string the reference pitch so
the guitar will be in tune with the piano.
NOTE: Loading any other tuning will erase the ref-
erence tuning. To save this tuning as a user tuning
preset, treat it as a Custom Tuning and follow the
steps in A CUSTOM TUNING above.
Do not use Pitch Assistance!
• When the TronicalTune PLUS is switched off,
tune one string to the new reference pitch.
• Press ON three times. Press ENTER.
• Press the LEFT/RIGHT button to select the
WHITE D string LED. Press ENTER.
• E string flashes RED . Use the LEFT/RIGHT
button to select the string you tuned as reference
pitch.
• Pluck the string. When the string LED lights up
GREEN and all others are RED , strum to tune
the guitar.
• LEDs turn off = reference tuning is complete.
G FIRMWARE VERSION
Display the TronicalTune PLUS’s firmware version
• When the TronicalTune PLUS is switched off,
press ON three times. Press ENTER.
• Press the LEFT/RIGHT button to select the
WHITE G string LED. Press ENTER.
• You’ll see three sequences of LEDs. The
number of GREEN LEDs is the version number’s
Tuning Functions
White Category
28