EasyManua.ls Logo

tronical Tune - User Manual

tronical Tune
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MANUAL
V 2.12
MANUAL
V 2.12
WE ARE SPINNING HEADS!
Question and Answer IconNeed help?

Do you have a question about the tronical Tune and is the answer not in the manual?

Summary

Getting Started: Guitar System Installation

Guitar System Installation Steps

Step 1-3: Headstock Preparation and PCB Mounting

Steps for removing old parts and mounting the main PCB onto the guitar headstock.

Step 4-6: Robohead Installation and Tightening

Instructions for fitting Roboheads and securing them with hex nuts.

Getting Started: Stringing Your Guitar

Function Menu: String Up;Down Mode

Entering String Up;Down Mode

Steps to activate and navigate the string up/down mode for restringing.

Using String Up;Down Mode

How to unwind or wind strings and the system's automatic tuning process.

Getting Started: Tuning Procedures

Re-Tuning Process

Steps for re-tuning strings, including strumming and muting techniques.

Start to Tune: Multi-String Tuning

Multi-String Tuning Operation

Step-by-step guide to perform tuning using the multi-string mode.

Start to Tune: Single-String Tuning

Single-String Tuning Procedure

Step-by-step guide to perform tuning using the single-string mode.

Function Menu: Custom Tuning

Manual Guitar Tuning for Saving

Instructions on how to manually tune the guitar for saving as a custom preset.

Saving Custom Tuning Presets

Steps for saving the manually tuned settings into the system's memory.

Function Menu: Saving Custom Tunings

Selecting Preset Position for Saving

How to choose one of the six preset slots in the Blue Bank for saving.

Confirmation of Saved Tuning

How the system confirms that a custom tuning has been successfully saved.

Function Menu: Reference Tuning

Setting a Reference Tuning

Steps to set a desired tuning as a reference for future tuning operations.

Configuration Menu Overview

Accessing Configuration Menu

Steps to enter the system's configuration menu.

Configuration Menu: Accuracy Mode

Setting Tuning Accuracy Level

How to adjust the accuracy level for tuning, affecting time and precision.

Impact of Accuracy on Tuning Time

Explains how higher accuracy increases tuning time and lower accuracy decreases it.

Configuration Menu: Robohead Delay

Adjusting Robohead Start Delay

How to set a delay for the Roboheads to start moving, up to 2.5 seconds.

Configuration Menu: Reset Options

Resetting Custom Tunings

How to reset only the custom tuning data stored in the system.

Performing Factory Reset

How to perform a full factory reset, clearing all data except custom tuning.

Configuration Menu: Robohead Speed

Setting Robohead Speed

How to adjust the speed and acceleration of the Roboheads for tuning.

Configuration Menu: Interference Level

Adjusting Interference Level

How to set the global interference level to improve tuning performance.

System Configuration Overview

Accessing System Configuration

Steps to enter the system's configuration menu for advanced settings.

System Configuration: Gain Settings

Adjusting Input Gain Level

How to adjust the gain setting to optimize signal recognition and prevent fading.

System Configuration: Guitar Type

Selecting Guitar Type

How to set the system for acoustic or electric guitars for optimal performance.

System Configuration: Pitch Window

System Configuration: Tuning Click Options

Tronical Tune Battery Charging

tronical Tune Specifications

General IconGeneral
Tuning Accuracy+/- 1 cent
Power SourceRechargeable lithium battery
DisplayLED Display
TypeAutomatic Guitar Tuner
CategoryGuitar Accessories
Tuning RangeStandard and alternate tunings
Tuning PresetsMultiple presets available
Motor TypeServo motor
DimensionsVaries by model

Related product manuals