tronical Tune - System Configuration: Tuning Click Options; Selecting Single Click Tuning; Selecting Double Click Tuning

WWW.TRONICAL-COMPONENTS.COM
37
SYSTEM CONFIGURATION
SINGLE OR DOUBLE CLICK FOR TUNE
G
BAT
e B G D A E
MENU
G
ENTER
DOWN
LEFT / RIGHT
ON/BACK
Push the “ON“ button. The system comes up with the last completed tuning in
MULTISTRING MODE.
Push the “BACK“ button to enter TUNING SELECTION MODE. The “MENU“ LED
is off.
To enter SYSTEM CONFIGURATION
PRESS and HOLD both “RIGHT“ and “ENTER“ AT THE SAME TIME.
The “MENU“LED and “E“LED light up YELLOW.
For SINGLE OR DOUBLE CLICK TUNING, SELECT “G“LED and PRESS ”ENTER”
Select either LEDE for “SINGLE CLICK“ or LED “A“ for “DOUBLE CLICK.“
PRESS “ENTER“ to CONFIRM.
i
SELECT BETWEEN SINGLE CLICK OR DOUBLE CLICK TO ACTIVATE
TUNING.
SINGLE CLICK: PRESS ONCE TO CONFIRM SELECTED TUNING
DOUBLE CLICK: PRESS TWICE TO CONFIRM SELECTED TUNING
MORE TIME TO REMOVE HAND OUT OF THE SYSTEM / ROBOHEADS
BAT
MENU
E
A
D
G
B
e
LEFT / RIGHT
ENTER
BACK
CLICK OPTIONS
GREEN BLINKING “E“ LED :
SINGLE CLICK DEFAULT
GREEN “E“ & BLUE “A“ BLINKING LEDS:
DOUBLE CLICK
BAT
MENU
E
A
D
G
B
e
BAT
MENU
EA
D
G
B
e
A
ii