tronical Tune - Configuration Menu: Robohead Delay; Adjusting Robohead Start Delay

WWW.TRONICAL-COMPONENTS.COM
29
BAT
e B G D A E
MENU
BAT
e B G
MENU
BAT
MENU
PRESS “LEFT/RIGHT“ to select desired delay level.
PRESS“ENTER“ to confirm.
All String LEDS FLASH GREEN TWICE to confirm SELECTED DELAY LEVEL has
been stored.
PUSH ”BACK” for CONFIGURATION MENU.
THE MAX DELAY LEVEL AS SHOWN LEFT WILL DELAY THE START OF
THE ROBOHEADS BY 2.5 SEC.
EACH ADDITIONAL LED DECREASES THE DELAY BY 0.5 SEC.
E
E
A
A
D
D
G
B
B
e
D
LEFT / RIGHT
ENTER
ROBOHEAD SPEED
BACK
LOW DELAY
NO DELAY
HIGH DELAY
(2,5 SEC)
EXAMPLE: MAX DELAY
ROBOHEAD DELAY
SET THE STARTDELAY OF THE ROBOHEADS.
D
CONFIGURATION MENU
PUSH “ON“ button. The system comes up with the last completed tuning in
MULTISTRING MODE.
PUSH “BACK“ button to enter TUNING SELECTION MODE. MENU LED is OFF.
TO ENTER CONFIGURATION MENU
PRESS AND HOLD “DOWN“ button until MENU and “LEDE“ LED TURN
LIGHT BLUE.
TO ACCESS ROBOHEAD DELAY SELECT “D“LED and PRESS ”ENTER”.
WHEN YOU CHANGE A TUNING THE ROBOHEADS WILL START
IMMEDIATELY IN ORDER TO CHANGE THE PITCH. WITH THIS
FUNCTION YOU CAN DELAY THE START UP TO 2.5 SECONDS.
ENTER
DOWN
LEFT / RIGHT
ON/BACK
THE DEFAULT IS NO DELAY ALL LEDS ON.
i
i