tronical TUNE PLUS - Page 31

RESTORE FACTORY DEFAULT TUNING PRESETS FOR THE SELECTED TUNING PRESET BANK
1. When the TronicalTune PLUS is switched off, press ON three times.
2. Press the LEFT/RIGHT button to select RED e string LED. Press ENTER.
3. Use the LEFT/RIGHT button to select the string LED associated with the function. The remaining proce-
dure is the same for each reset function.
4. Press and hold the ENTER and UP buttons simultaneously.
5. LEDs flash sequentially in the same color as the bank = reset confirmed.
6. To reset additional banks, repeat steps 3-5.
NOTE: After a reset, use CALIBRATION MODE to re-calibrate the guitar (P. 33)
RESTORE TO ORIGINAL FACTORY SETTINGS
(also highly recommended when changing string gauges)
• When the TronicalTune PLUS is switched off, press ON three times.
• Press the LEFT/RIGHT button to select RED e string LED. Press ENTER.
• Press the LEFT/RIGHT button to select E LED lights CYAN .
• Press and hold the ENTER and UP buttons simultaneously.
• CYAN LEDs light sequentially = reset confirmed.
• After a reset, use CALIBRATION MODE to re-calibrate the guitar (Page 33).
NOTE: This procedure erases all custom tunings.
31