Troxler NTO 4730 - Erase ACF

Troxler NTO 6–11
6. CALIBRATION
The ACF value can be from –5.00 to 5.00%, in increments of
0.01%. Use the numeric keys to enter the ACF. Use the arrow keys
to toggle the sign (positive [+] or negative [–]) of the correction
factor. When the new ACF value is complete, press 〈ENTER〉. The
oven activates the new ACF value, briefly displays a confirmation
message, and returns to the Correction Menu.
ERASE ACF
To erase one or more ACFs, press 〈3〉 at the Correction Menu
shown on page 6–8. The oven displays:
Erase
1. One ACF
2. All ACFs
To erase all ACFs, press 〈2〉 and follow the prompts. To erase a
single ACF, press 〈1〉. The oven displays:
Select
1. Scroll ACFs
2. Enter ACF ID
f To choose an ACF from a list, press 〈1〉. The oven displays the
ID of the first ACF. Use the arrow keys to scroll through the
list. To select an ACF for erasure, press 〈ENTER〉 when the
oven displays the ACF ID.