Troxler NTO 5–3
5. MAIN MENU
OVEN MAIN MENU
WARNING
To prevent personal injury or equipment damage, the
operator should become familiar with the safety
warnings and information in Chapter 2 before operating
the Troxler NTO Asphalt Content Ignition Oven.
The oven control software includes a number of options that can be
configured by the operator for greater flexibility of operation. To
access these options, press 〈MENU〉. The oven displays the MAIN
MENU shown below. To select an item from the menu, press the
corresponding numeric key. Use the up and down arrows to scroll
through the menu options.
MAIN MENU ¦
1. Burn Setup
2. Auto-Timer
3. Project
MAIN MENU ¦
4. Corr. Factors
5. Scale
6. Status
MAIN MENU ¦
7. Store
8. Miscellaneous
For most of these items, pressing the corresponding numeric key
displays a submenu. Many of these submenus in turn have
submenus of their own. A complete map of these menus is provided
in Appendix B of this manual.
The remainder of this chapter describes each menu option, except
for the Project option, which is described in Chapter 7, and the
Corr. Factors and Scale options, which ar
e described in Chapter 6.
To Next Page
Loading...
Need help?
General
