Troxler NTO 7–9
7. HANDLING DATA
DOWNLOAD
The Download function enables the operator to download project
data previously stored in the oven to a computer or other serial
device. Before enabling this function, connect the serial
communications port to the external device and check the baud rate
as described on page 5–30.
NOTE
To ensure pr
oper data transfer, the ca
ble connected to
the serial communications port should not exceed 3 m
(10 ft) in length.
To download project data stored previously, press 〈6〉 at the
Project Menu. The oven displays:
Output
1. One Project
2. All Projects
f To output a single project, press 〈1〉. The oven displays:
Select
1. Scroll Projects
2. Enter Project ID
Press 〈1〉 to scroll through the stored projects, or 〈2〉 to enter a
known project ID. Follow the same procedures as described in
the Select section o
n page 7–3 t
o select or enter the desired
project ID.
To Next Page
Loading...
Need help?
General
