3–4
7. Connect the oven to the required power source (refer to
Appendix C).
WARNING
The power source must have a reliable earth ground
connection, or a hazardous condition may occur
during oven operation.
NOTE
On 240 V ac (Model 4731) ovens, a connector must be
installed on the oven power cord. In the U.S. and
Canada, the connector must meet ANSI/UL 498 safety
requirements (NEMA Type 6-20P). In Europe, the
connector must meet IEC 320 safety requirements.
Refer to the Electrical Specifications section on page C–4
for the curr
en
t and voltage ratings for the oven.
NOTE
The Troxler NTO Asphalt Content Ignition Oven is a
precision instrument. Troxler recommends using an
uninterruptible power supply or surge protection on the
oven’s input power source.
8. Set up the oven as described in Chapter 4.
To Next Page
Loading...
Need help?
General
