Troy-Bilt 12AG836E011 User Manual

Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Lea el manual de operación anexo sobre ensamblaje e inicio.
Secure cable to lower handle with
cable tie provided.
1
2
3
4
Refer to Operator’s Manual for instructions on attaching the grass catcher.
Insert carriage bolts and tighten with star knobs.
Repeat on opposite side.
12AG836E011
12AG836G211
778-11133A
© 2006
Starter
Rope
Blade Control Handle
Star Knobs
A
C
D
B
Hold blade control handle against upper handle.
Slowly slip starter rope into rope guide.
Tighten rope guide wing knob.
A
B
Lift handle to extended position.
Tighten star knobs.

Troy-Bilt 12AG836E011 Specifications

General

Brand	Troy-Bilt
Model	12AG836E011
Category	Lawn Mower
Language	English

Summary

Lawnmower Handle and Starter Setup

Handle Adjustment and Securing

Extend the handle to its position and tighten the star knobs. Insert carriage bolts.

Starter Rope and Cable Management

Route the starter rope into the guide and secure the cable to the handle.

Engine Preparation and Starting

Fuel and Oil Filling

Fill the fuel tank and add oil to the engine using the supplied bottle.

Electric Start Battery Charging

Charge the electric start battery for 8-10 hours before initial use.

Starting the Engine

Hold the blade control handle, pull the starter rope with a full stroke.