EasyManua.ls Logo

Troy-Bilt 20296 - How to Stop Your Pressure Washer; Using the Accessory Tray

Troy-Bilt 20296
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
The highpressurestreamofwaterthatthis
equipmentproducescancutthroughskinandits
_ nderlyingtissues, leading to serious injury and
possible amputation.
Spraygun traps high water pressure, evenwhen
engine is stopped and water is disconnected,
which can cause injury.
. DONOTallowCHILDRENtooperatepressurewasher.
Keephighpressurehoseconnectedto pumpandspraygun
whilesystemis pressurized.
NEVERaimspraygunat people,animals,or plants.
DONOTsecurespraygunin openposition.
DONOTleavespraygununattendedwhilemachineis running.
NEVERuseaspraygunwhichdoesnot haveatriggerlockor
triggerguardin placeandin workingorder.
Alwaysbecertainspraygun,nozzlesandaccessoriesare
correctlyattached.
WARNING
_ ontact with muffler area can result in serious
burns.
._I_.K Exhaustheat/gases can ignite combustibles,
structures or damagefuel tank causing a fire.
. DO NOTtouch hot parts and AVOIDhot exhaust gases.
Allow equipment to cool beforetouching.
Keepat least5 feet (1.5 m) of clearanceon all sidesof pressure
washer including overhead.
Codeof FederalRegulation (CFR)Title 36 Parks, Forests,and
Public Property require equipment powered by an internal
combustion engine to have a spark arrester, maintained in
effective working order, complying to USDAForestservice
standard 5100-1C or later revision. In the State of California a
spark arrester is required under section 4442 of the California
Public resources code. Other states may havesimilar laws.
Howto Stop YourPressureWasher
1. Releasespray gun trigger and let engine idle for two
minutes.
2. Turn engine off according to instructions given in
engine operator's manual.
3. ALWAYSpoint spray gun in a safe direction and
squeezespray gun trigger to release retained high
water pressure.
WARNING
Thehigh pressure stream of water that this
equipment produces can cut through skin and its
_ nderlying tissues, leading to serious injury and
)ossible amputation.
Spraygun traps high water pressure, even when
engine is stopped and water is disconnected,
which cancause injury.
Keephighpressurehoseconnectedto pumpandspraygun
whilesystemis pressurized.
. ALWAYSpointspraygunin safedirectionandsqueezespray
guntrigger,to releasehighpressure,everytimeyoustop
engine.Engagetriggerlockwhennot in use.
IMPOBTANT:Spray gun traps high water pressure,even
when engine is stopped and water is disconnected.
4. Engagetrigger lock on spray gun when not in use.
How to UseAccessory Tray
Theunit is equipped with an accessory tray with placesto
store your spray gun, nozzleextensionand quick connect
spray tips. There is also a hook atthe front of the accessory
tray to hold your high pressure hose.
NOTE:The extra hole in the tray is for storing a utility brush.
Theextra clip in thetray is for storing a turbo nozzle.The
brush and turbo nozzleare NOTincluded with your pressure
washer.You can buythese items as optional accessories.
1. Placenozzleextension through hole on accessory tray,
asshown.
13

Related product manuals