MAKE SURE THE SAFETY DECALS ON YOUR EQUIPMENTARE KEPT CLEAN AND
IN
GOOD
CONDITION SO YOU CAN FOLLOW THE INSTRUCTIONS ON THEM!
Please
contact
us
immediately
for
replacement
decals
should
they
become
worn
or
unreadable.
#2. Th
is
Decal appears once on the
top
of
your
equipment inside the shredder
hopper.
ROTATING
CUTTING BLADES
INSIDE DISCHARGE OPENING
WILL
CAUSE
SERIOUS PERSONAL
INJURY.
KEEPAWAY!
KEEP
HANDS AND
FEET
OUT
OF
DISCHARGE OPENING
WHEN
MACHINE IS RUNNING, AND
KEEP
SERVICE
DOOR
SECURED
WITH
ROD
AND HAIR PIN.
PROCESSED MATERIAL EXITS
AT
HIGH
SPEED
BELOW.
KEEP
HANDS AND FEET
AWAY
FROM
DISCHARGE AREA
TO
AVOID
INJURY.
#5.
This
Decal appears
once
on the side
of
your
chipper/shredder
right next
to
the discharge area.
HOT
SURFACES
CAN
CAUSE
SEVERE
BURNS.
00
NOT
TOUCH
MUFFLER
OR
ADJACENT
AREAS.
#6.
This Decal appears once
right nextto the muffler area.
KEEP HANDS AND FEET OUT
OF INLET AND DISCHARGE
OPENINGS WHILE MACHINE
IS
RUNNING
TO
AVOID
SERIOUS PERSONAL INJURY.
-------------------
NO HANDS BELOW THIS LINE
ROTATING CHIPPER
BLADE
WILL
CAUSE
SERIOUS PERSONAL
INJURY. KEEP HANDS
AWAY
FROM CHIPPER
CHUTE
INLET
AT
ALL
TIMES.
#3.
This Decal appearsonce
on the
sideofyourequip-
ment next
to
the
chipper
chute.
ADANGER
ROTATING CUTTING
BLADES
INSIDE DISCHARGE OPENING
WILL
CAUSE SERIOUS
PERSONAL INJURY.
KEEPAWAY!
KEEP HANDS
AND
FEET OUT OF
DISCHARGE OPENING AND
AWAY
FROM DISCHARGE AREA WHEN
MACHINE IS RUNNING.
#1.
This
Decal appears once on
the
front
of
your
equipment
next
to
the discharge area.
#4.
This Decal is located in the neck
of
your
equipment
inside
the
mainframe. It's
only
visible when the shredder
hopper
is
dis-
connected and removed
for
servicing
or
repair.
A DANGER
THE ROTATING SHREDDER CUTTING BLADES INSIDE THE
DISCHARGE OPENING
CUT
'I."
FROM THE DISCHARGE
SCREEN. CONTACT WITH ROTATING CUTTING BLADES
WILL RESULT INSERIOUS PERSONAL INJURY. KEEP HANDS
AND
FEET
OUT
OF DISCHARGE OPENING AND
AWAY
FROM DISCHARGE AREA WHEN MACHINE IS RUNNING.
IN ORDER
TO
REMOVE CHIPPED
OR
SHREDDED MATERIAL
FROM THE DISCHARGE AREA, USE A LONG-HANDLED
SHOVEL
OR
LONG STICK - NEVER USE YOUR
HANDS
OR
FEET! IF MATERIAL SHOULD EVER
CLOG
THE CHAMBER,
DISCHARGE TUNNEL
OR
DISCHARGE OPENING,
OR
THE
MACHINE SHOULD REQUIRE MAINTENANCE
OR
SERVICE,
ALWAYS STOP
UNIT
BY PUSHING ENGINE SHUT-OFF TAB
(On Top
Of
Engine) AGAINST SPARK PLUG AND HOLD
THERE
UNTIL
ALL
MOVING PARTS HAVE COME
TO
A
COM-
PLETE STOP. DISCONNECTTHE SPARK PLUG WIRE. USE A
LONG STICK TO CLEAR THE CLOGGED MATERIAL.
Shredder Hopper
Rotating Shredder
Cutting
Blades
cut
W' Away From The Discharge Screen
- KEEP HANDS
AND
FEET
AWAY
from Discharge Area and Discharge
Opening At All TimesTo Avoid Serious
Personal Injury!
'I." Between
Shredder Blades
and Discharge Screen
Discharge
j-'T---
Screen
Rubber
,/7---
Retainer
Flap
Chipper Aywheel
Chipper Blade
Chipper/Shredder
Mainframe
4
To Next Page
Loading...
