SPECIFICATIONS
JUNIOR TOMAHAWK® CHIPPER/SHREDDER
Chipper/Shredder Specs
--------------
Chipping/Shredding
Capability:
Frame Construction:
Shredder Flail Cutter Blades:
Chipper
Blade:
Overall Measurements:
Weight:
Wheels:
Up
to
%"
diameter material in shredder hopper.
%"-to-2" diameter material in chipper chute.
Heavy-gauge steel.
Four hardened steel blades,
each with
four
cutting edges.
Hardened steel blade (revolves at 3600 RPM).
Length - 25"
Width - 23"
Height -
40%"
1151bs.
10%"
x 3%"; plastic
Tecumseh Engine Specs
---------------
Manufacturer & General Information:
Horsepower Rating:
Motor
Oil Requirements:
Motor
Oil Capacity:
Fuel Tank Capacity:
Fuel Recommendations:
Spark Plug:
Ignition System:
Speed Setting:
Tecumseh, Model H-35 manual recoil-start,
four-cycle, single-cylinder, air-cooled engine.
Horizontal crankshaft. Manual choke.
3 HP
Refer to Page 6 for oil classification and viscosity
recommendations.
21
ounces. Add in Oil Fill Hole at base of engine
on Carburetor side.
2 quarts.
Use Unleaded Regular automotive gasoline.
Leaded Regular is
an
acceptable substitute.
Champion J-8
or
its equivalent.
Set gap at .030".
Canadian owners use
Champion RJ-17LM
or
equivalent.
Maintenance-free solid state system.
(No need
for
points
or
condenser.)
3600
RPM
(±150 RPM).
21
To Next Page
Loading...
