12
About tab
This tab allows you to view the properties of the panel reader. The panel reader properties may be required during troubleshooting.
Setting Options Explanation
Firmware version N/A (read only) Version of software used by the panel reader. To update the panel reader’s software, see
Upgrading
the software
on page 15.
Serial number N/A (read only) The panel reader’s serial number.
Supply voltage N/A (read only) The panel reader power supply voltage level.
Clear Configuration tab
The tab allows you to reset the panel reader’s settings to default values. This will not alter previously recorded records or sessions.
Setting Options Explanation
Reset all XRP2
configurations back to
factory defaults
N/A
Click on Reset all XRP2 configurations back to factory defaults to reset the panel reader’s
settings to default values, as indicated by the asterisks on the settings throughout this table.
Defaults are marked *
To Next Page
Loading...
