True Fitness TPS300-17 User Manual (English)

Questions and Answers:

K
Kristina BryantAug 7, 2025
Why does my True Fitness Treadmill unit reset or pause randomly?
- J
  James PriceAug 7, 2025
  If your True Fitness Treadmill resets or pauses randomly, there might be several reasons. Begin by replacing the power cord, as it may be damaged. Ensure the power cord is properly connected to both the unit and the outlet. Make sure the safety e-stop key is fully engaged with the console. Insufficient power could also be the issue, so verify the output voltage from the 20A outlet using a voltmeter. Finally, user weight must be over 90lbs. Verify No User Present settings in console.
K
Kimberly SalazarAug 12, 2025
How to troubleshoot no power on my True Fitness TPS300-17 Treadmill?
- S
  Stephanie HughesAug 12, 2025
  If your True Fitness Treadmill has no power, first ensure the On/Off switch is in the ON position. Check the power cord to see if it is damaged and replace it if necessary. Make sure the power cord is fully seated in the socket at both the unit and the outlet. Use a voltmeter to verify that there is power at the outlet. Also, check the circuit breaker next to the On/Off switch to ensure it hasn't tripped; reset it if needed.
W
websterjasonAug 17, 2025
Why is the heart rate displaying erratically or not displaying on my True Fitness TPS300-17?
- D
  Dr. Tracy Mitchell DDSAug 17, 2025
  If you experience erratic or no heart rate display on your True Fitness Treadmill, ensure the transmitter belt contacts are making good contact with your skin by readjusting the belt. Also, moisten the contacts on the transmitter belt. Make sure you are positioned within 3 feet (1 meter) of the heart rate receiver on the console.
C
Crystal HessAug 21, 2025
What to do if the walking belt is off center on my True Fitness Treadmill?

True Fitness TPS300-17 Specifications

General

Incline Range	0% to 15%
Display	LCD
Weight Capacity	350 lbs
Foldable	No
Motor	3.0 HP
Running Area/Surface	20" x 60"
Speed Range	0.5 to 12 mph
Heart Rate Monitoring	Contact