Need help?Do you have a question about the True Fitness TREADMILL 2011 and is the answer not in the manual?
General| Brand | True Fitness |
|---|---|
| Model | TREADMILL 2011 |
| Category | Treadmill |
| Language | English |
Safety warning about hazardous voltages and high speed moving parts.
Notes regarding manual scope, limitations, and contacting the factory representative.
Defines who is considered qualified personnel for servicing the equipment.
Covers diagnostic procedures, including error codes and system overviews.
Explains the three types of drive systems used in True treadmills.
Details the AC motor elevation system, potentiometer feedback, and voltage.
Lists common error codes, their reasons, and suggested resolutions.
Troubleshooting for common issues like no console display or erratic heart rate.
Procedure for testing AC amp draw on treadmills under load and no load.
Tests for speed sensor functionality on TPS/Z Series and TCS Series treadmills.
Procedure to test the incline motor potentiometer and its voltage output.
Procedure to measure AC voltage output to the incline motor for UP and DOWN commands.
Tests the treadmill belt's ability to carry the user based on elevation and force.
Procedure for checking and adjusting running belt tension to prevent hesitation or slipping.
Steps to align the treadmill's running belt using rear roller adjustments.
Instructions for applying silicone lubricant to the treadmill deck and belt.
Daily and weekly cleaning, and general inspection tasks for treadmill maintenance.
Diagram showing the layout and LED indicators on the commercial treadmill lower control board.
Detailed description of each LED indicator on the commercial lower control board.
List of blink codes for the motor control board and their meanings.
Explanation of LED indicators on the smart card for system status and transmission.
Procedure to access calibration mode and calibrate treadmill incline and speed.
Instructions for programming the analog and digital TV tuner for display.
Steps for performing an automatic scan to find TV channels.
Steps for programming TV preset channel locations for wireless audio.
Procedure to enter test mode for accessing system settings.
Procedure to enter BV setup mode for transmitter compatibility.
Procedure for configuring the 11-inch console model and options.
Procedure for resetting the configuration of the touchscreen console model.
Instructions for installing software updates on the 15-inch touchscreen display.
Instructions for installing software updates on 2-window and 11-inch LCD displays.
To Next Page