True PS100 - User Manual

Other manuals for True PS100

Specifications2 pages

Questions and Answers

B
burnettbrendaAug 5, 2025
What to do if the heart rate is not displaying on my True Recumbent bike?
- T
  Tammy WelchAug 5, 2025
  If the heart rate isn't showing on your True Recumbent bike, several factors could be at play: * Ensure the transmitter belt makes full contact with your skin by readjusting it. * Moisten the contacts on the transmitter belt. * Make sure the transmitter belt is within 3 feet (1 meter) of the console. * Verify that the transmitter belt is compatible (4.8kHz un-encoded). * Consider replacing the transmitter belt if its battery is depleted. * If another user with a compatible transmitter strap is nearby, increase the distance between the units. * Environmental factors, such as high voltage power lines, might be interfering. Relocate the unit or the source of interference; if the source shares an outlet, try a different one.
R
Regina GonzalezAug 14, 2025
How to fix heart rate reading issues on True Recumbent bike?
- O
  Olivia CaseyAug 14, 2025
  To resolve heart rate reading problems on your True Recumbent bike, consider these potential causes and solutions: * Poor contact between the transmitter belt and your skin: Readjust the belt. * Dry contacts on the transmitter belt: Moisten the contacts. * Being too far from the receiver: Ensure you are within 3 feet (1 meter) of the console. * Incompatible transmitter belt: Use a 4.8kHz un-encoded receiver. * Depleted transmitter belt battery: Replace the belt. * Interference from another user's transmitter: Increase the space between units. * Environmental interference: Relocate the unit or the source of interference, or try a different outlet.
B
Brian HuntOct 25, 2025
Why is the heart rate displaying erratically on my True Recumbent bike?
- C
  cfranklinOct 25, 2025
  Erratic or absent heart rate readings on your True Recumbent bike can stem from several factors: * The transmitter belt contacts might not be making good contact with your skin. Readjust the belt for full contact. * The contacts on the transmitter belt may be dry. Moisten them. * You may be positioned too far from the receiver. Ensure you're within 3 feet (1 meter) of the console. * The transmitter belt could be incompatible (not 4.8kHz un-encoded). * The transmitter belt battery might be depleted, requiring a replacement. * Another user nearby might be using a compatible transmitter strap, causing interference. Increase the space between units. * Environmental interference from high voltage power lines can disrupt readings. Try moving the unit or the source of interference,...