Why is the heart rate on my True PS900 displaying erratically?
If the heart rate reading on your True Treadmill is unstable, it might be due to environmental interference from high voltage power lines. Try moving the treadmill to a different spot in the room or relocating the source of the interference until the readings stabilize. If you suspect a device plugged into the same outlet is causing the issue, try plugging it into a different outlet.
What to do if my True Treadmill shows an E5 sensor error?
If your True Treadmill displays an E5 Sensor error, which indicates a drive system issue, try lubricating the unit. This is because the error may be caused by belt and deck friction. Refer to Chapter 5: Treadmill Lubrication for instructions.
What causes memory fail on a True PS900 Treadmill and how to fix it?
If you are experiencing a memory fail on your True Treadmill, use a humidifier to add humidity to the air. Also, ensure the unit is plugged into a grounded outlet. This issue might also be caused by excessive static electricity, so lubricating the unit may help. Refer to Chapter 5: Treadmill Lubrication for instructions.
Covers critical warnings for electrical shock, injury, and health precautions.
Explains how to attach and use the safety clip for emergency stopping.
Details recommended clearance around the treadmill for safe operation.
Provides essential information on proper electrical grounding for safety.
Outlines voltage, amperage, and outlet specifications for the treadmill.
Instructs on locating and replacing safety warning labels on the equipment.
States that the equipment meets applicable codes and regulations.
Highlights critical safety precautions before and during assembly.
Covers treadmill placement, level surface, and specific electrical outlet needs.
Lists all components and hardware required for treadmill assembly.
Provides a step-by-step guide for assembling the treadmill.
Identifies and describes key components and features of the treadmill.
Explains how to monitor heart rate using hand grips or chest straps.
Details the advanced feature for controlling workouts based on target heart rate.
Describes the console display, buttons, and their functions for operation.
Outlines various pre-programmed workouts like Quick Start, Hill Intervals, etc.
Explains how to save and replay custom workout programs.
Covers features like diagnostics, calibration, and unit settings.
Emphasizes the importance of regular maintenance for warranty and performance.
Provides instructions for cleaning the treadmill after use and weekly.
Guides on how to adjust the belt to keep it centered on the deck.
Explains how to tighten the belt if it slips or jerks.
Details the recommended lubrication schedule for the treadmill.
Describes how to adjust the rear feet to ensure the treadmill is level.
Lists tasks for quarterly maintenance by a technician.
Provides instructions for storing the treadmill when not in use for extended periods.
Guides on how to get technical support and schedule service appointments.
Explains the procedure for reporting shipping or product damage.
Offers solutions for common malfunctions and error codes.
Details the warranty terms for commercial use of the treadmill.
Outlines the warranty conditions for residential use of the treadmill.
To Next Page
General
