truefitness.com / 800.426.6570 / 1.636.272.7100
8
Chapter 1: Safety Instructions
• e 120-V model is for use on a nominal 120-V circuit and has a grounding plug that looks like the plug illustrated
in gure A. Make sure the product is connected to an outlet having the same conguration as the plug. No adaptor
should be used with this product.
• e 230-V model is for use on a circuit having a nominal rating more than 120-V and is factory-equipped with
a specic electric cord and has a grounding plug that looks like the plug illustrated in gure B. Make sure that the
product is connected to an outlet having the same conguration as the plug in Figure B. No adapter should be used
with this product. If the product must be reconnected for use on a dierent type of electric circuit, the reconnection
should be made by qualied service personnel.
POWER REQUIREMENTS FOR TRUE PRODUCTS PAGE
STARTING AND STOPPING THE TREADMILL SAFELY:
Place your feet on the straddle covers.
Attach the safety key to your waistband.
Place the magnetic end of the safety key on the key holder.
IMPORTANT: To prevent unauthorized use, remove safety key and safety clip aer your workout and store it in a safe
place. e treadmill cannot operate unless the magnetic safety key is attached to key holder.
Set up your workout and press START.
Stop the treadmill by reducing speed to 2 mph or less, then press STOP.
To Next Page
Loading...
Need help?
General
