CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100 12
TREADMILL ASSEMBLY STEPS (continued):
Rear Foot Leveling:
a) Ensure treadmill incline rack wheels and rear feet are resting on the floor and not on cardboard,
packaging, etc.
b) Using the pliers to loosen the wing-nut (A) counter-clockwise.
c) Using a level or estimating by sight, turn section (B) of foot counter-clockwise to a proper height.
d) Tighten wing-nut (A) to secure (B) section.
NOTE: Same adjustment applies to both sides.
Safety Key Attachment:
a) Remove packaged Safety key from hardware kit.
b) Remove Safety Key from bag and unwind cord from clip.
c) Attach Safety Key magnet (A) to front of console (B) as shown below.
d) Attach clip (C) to clothing at the beginning of any workout.
CAUTION: Read the entire Owner’s Manual before attempting any workout.
CAUTION: Remove Safety Key from treadmill after each use.
Cut off the piece of string as shown
To Next Page
Loading...
