True TAC-48 - Shelving and Flavor Strip Installation

............ www.truemfg.com ............
True Food Service Equipment, Inc.
25
25
CANTILEVER SHELVING INSTALLATION:
A. Installtheshelfsupportsintotheshelfstandardsthatare
locatedintherearcornersofthecabinet.(Seephotos1
&2).
Shelf
Clip
Shelf
Shelf
Shelf
Standards
SHELVING INSTALLATION / OPERATION
INSTALLATION / OPERATION INSTRUCTIONS
SHELF INSTALLATION:
A. Hookshelfclipsontoshelfstandards.(seeshelfInstallillustration).
B. Positionallfourshelfclipsequalindistancefromthefloorforflat
shelves.
 Wireshelvesareorientedsothatcrosssupportbarsarefacing
down.
C. Placeshelvesonshelfclipsmakingsureallcornersareseated
properly.
NOTE
Do not load product to where it would over hang the shelf.
(shelfInstallIllustration)
TAC-72 CANTILEVER SHELVING INSTALLATION:
A. TAC-72cantilevershelvescomepackagedinsidethe
unit.Leglevelingpartsmaybetapedtothetopofthe
shelfpackaging.Removeleglevelingparts.(Seephoto
3).
B. Removecantilevershelvesfrompackagingandprotective
wrap.
C. Installtheshelfsupportsintotheshelfstandardsthat
arelocatedintherearcornersandmiddleofthecabinet.
(Seephoto4).
1
3
4
2