27
STEP 13—LEVEL THE TREADMILL
Once the machine has been moved to it’s designated location:
1. Verify the treadmill is resting on the fl oor and not on any packaging materials.
2. Using a level or estimating by sight, adjust both leveling feet until they contact the fl oor.
IMPORTANT! Do not adjust the leveling feet to such a height that they detach or unscrew from the machine.
3. Verify both wing nuts on the leveling feet are securely tightened—wing nuts should be fl ush against the bottom of the
frame.
wing nut
leveling feet
wing nut
NOTE: You should be able to
loosen and tighten the wing
nuts by hand. If not, use an
adjustable wrench.
To Next Page
Loading...
