To Next Page
M
Matthew PhillipsSep 23, 2025
What to do if my True TC400 shows Fault A114?
- YybrownSep 23, 2025
If your True Treadmill displays Fault A114: Motor Over Temp, lubricate the treadbelt.
What to do if my True TC400 shows Fault A114?
If your True Treadmill displays Fault A114: Motor Over Temp, lubricate the treadbelt.
How to troubleshoot no power on my True TC400?
If your True Treadmill has no power, first, make sure the On/Off switch is in the ON position. Then, check the power cord to ensure it is not damaged and is fully seated in the socket at both the unit and the outlet. Verify the outlet has power using a voltmeter. Finally, check the circuit breaker next to the On/Off switch to ensure it hasn't tripped; if it has, reset it.
Why is the heart rate displaying erratically on my True TC400?
If the heart rate on your True Treadmill is displaying erratically or not at all, ensure the transmitter belt contacts are making good contact with your skin and are moist. Make sure you are within 3 feet (1 meter) of the heart rate receiver on the console. If the battery inside the transmitter belt is depleted, replace it with a compatible one. Also, ensure that other users wearing compatible transmitter straps are not within 3 feet (1 meter) of the unit. Environmental interference from high voltage power lines can also cause this issue; try moving the unit or the source of interference.
What does Fault SP01 mean on my True Treadmill?
If your True Treadmill displays Fault SP01: Belt Under Speed, lubricate the treadbelt. Also, check the drive belt and walking belt tension.
What to do if my True Treadmill shows Fault SP02?
If your True Treadmill displays Fault SP02: Belt Over Speed, lubricate the treadbelt and check the AC line voltage.
How to troubleshoot Fault CN06 on True TC400?
If your True Treadmill displays Fault CN06: Config Mismatch, power cycle the treadmill and check the cable connections.
How do I fix Fault CN02 on my True Treadmill?
If your True Treadmill displays Fault CN02: Invalid Console Configuration, power cycle the treadmill.
What does Fault CN05 on my True Treadmill mean?
If your True Treadmill displays Fault CN05: No Lower Control, power cycle the treadmill and re-configure the console.
How to fix Fault A112 on True Treadmill?
If your True Treadmill displays Fault A112: Motor Controller Fault, power cycle the treadmill.
How to troubleshoot Fault IN04 on True Treadmill?
If your True Treadmill displays Fault IN04: Incline Max/Min, power cycle the treadmill.
Crucial safety rules for operating the treadmill and preventing injuries.
Details on electrical connections, grounding, and power specifications for safe operation.
Required clearances, physical dimensions, and warning decals for the equipment.
Essential steps and tools required before starting the treadmill assembly process.
Listing of all included parts, components, and hardware for assembly.
Detailed, sequential instructions for assembling the TC400 treadmill.
Identification and description of the treadmill's main components and features.
Guidelines for cleaning, inspection, and routine maintenance to ensure longevity.
Guide to identify and resolve common treadmill issues and error codes.
Electrical schematics illustrating the internal connections for 110V and 220V models.
Details on limited warranties for different treadmill parts and labor coverage.
Instructions and forms for registering the product to validate the warranty.
General
