Z8.1e Elliptical Owner’s Guide
Basic Features
INTRODUCTION
10
Three-mode Manual Control: MET-based, Runner’s Mode, or
10-watt increments.
Four Pre-set Programs: Easy intervals, speed intervals, rolling
hills, and one big hill.
CSAFE Network Communications: Full Level 3 compliance to
work with CSAFE hosts.
CSAFE Audio Control: Volume and channel remote control of
compatible systems.
CSAFE Power: Supply power to an external audio remote
control.
Fully Configurable Setup Mode: Choose default operational
mode, metric or U.S. units of measure, maximum workout
time, default workout time, pause time, wireless or contact
heart rate priority, sound on or off, and default manual
workload control.
Multiple Odometers: Miles, hours, total starts, and program
selection counters.
Test Mode: Monitor raw rpm, target vs. actual workload, LCD
performance, and keypad function.
For your maximum safety and comfort, make
sure you read Chapter 18, Important Safety
Instructions.
INTRODUCTION
BASIC
FEATURES:
FUNCTIONS YOU'D
EXPECT TO GET
FOR YOUR
SAFETY
To Next Page
Loading...
