CONVERSION INSTRUCTIONS
TO BE COMPLETED BY AN AUTHORISED PERSON
ENSURE GAS IS ISOLATED WHILST PERFORMING
CONVERSION WORK. PERFORM A LEAK TEST BEFORE
IGNITING AND CALIBRATING BURNER AND PILOT
ADJUSTMENTS.
To Propane Gas
Regulator Change regulator to PROPANE gas configuration
and adjust as necessary
Barbeque Burners Access and change the injectors to PROPANE Gas
injectors (refer Nominal Gas Consumption
Table)
LEAK TEST IN ACCORDANCE WITH APPROVED METHODS
Ignite burners and adjust.
AMEND DATA PLATE AND APPLY ‘PROPANE’ GAS LABEL
To Natural Gas (NG)
Regulator Change regulator to NG gas configuration and
adjust as necessary
Barbeque Burners Access and change the injectors to a NG Injectors
(refer Nominal Gas Consumption Table)
LEAK TEST IN ACCORDANCE WITH APPROVED METHODS
Ignite burners and adjust
AMEND DATA PLATE AND APPLY ‘NATURAL GAS’ LABEL
Barbeque Manual Page 19 Revision: 13 Sep 07
OPERATOR MANUAL B60 B90 130907.doc
To Next Page
Loading...