TSC MH261T Series - 5.5.4 Wi-Fi; 5.5.5 GPIO

- 42 -
5.5.4 Wi-Fi
Use this menu to check the status and to set the Wi-Fi settings.
Note: This subsection will only be visible when the Wi-Fi option installed.
Item
Description
Default
Status
This item is used to check the Wi-Fi status
N/A
Configure
This item is used to set the Wi-Fi configure
DHCP
SSID
This item is used to set the SSID
N/A
Security
This item is used to set the security
Open
Password
This item is used to set the security key
N/A
5.5.5 GPIO
This option is used to set the print engine GPIO settings.
Note: This subsection will only be visible when the GPIO option installed.
Interface
Wi-Fi
Status
Configure
DHCP
Static IP
SSID
Security
Password
Interface GPIO
Applicator Port
Start Print SIG
Error On Pause
Ribbon Low Mode
Ribbon Low Output
Backfeed
Reprint Mode