Need help?Do you have a question about the TSC MH240 Series and is the answer not in the manual?
General| Resolution | 203 dpi / 300 dpi |
|---|---|
| Max. Print Width | 104 mm (4.09 inches) |
| Processor | 32-bit RISC |
| Interfaces | RS-232, USB 2.0, Ethernet |
| Scanning Technology | Thermal Transfer / Direct Thermal |
| Interface | USB 2.0, Serial (RS-232), Ethernet, Parallel |
| Power Supply | AC 100-240V, 50-60Hz |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
Lists the various applications for the MH240 series printers.
Details the standard features of the MH240 series printers across different models.
Lists and describes optional features available for the printers.
Details the features of the optional label print module.
Provides physical dimensions, weight, and environmental conditions for the printers.
Details print head resolution, speed, dot size, and print width.
Outlines specifications for printer ribbons, such as diameter and length.
Details specifications for media like roll capacity, width, and thickness.
Instructions for unpacking and inspecting the printer and its contents.
Identifies and labels the components visible on the front of the printer.
Details and labels the internal parts of the MH240/MH240T series printers.
Details and labels the internal parts of the MH240P series printers.
Illustrates and labels the rear interfaces and components of the printers.
Explains LED indicators and keypad functions.
Explains the meaning of various icons displayed on the LCD and LED indicators.
Details how to interact with the printer's touch screen interface.
Describes how to access and use basic power-on utility functions.
Provides step-by-step instructions for the initial setup of the printer.
Step-by-step guide on how to load the ribbon into the printer.
Instructions for loading different types of media into the printer.
Guide on how to load fanfold or external media rolls.
Details the procedure for loading media in peel-off mode.
Instructions for loading media using the rewinder mode.
Explains how to adjust ribbon tension for optimal print quality.
Methods to fine-tune mechanisms to prevent ribbon wrinkles.
Guides on how to start and connect the TSC Console software.
Instructions for configuring the printer's Ethernet connection.
Steps to configure Wi-Fi settings and add the printer to TSC Console.
How to reset printer Wi-Fi settings to factory defaults.
Describes various printer functions available within the configuration.
How to configure post-print actions like cutting or peeling.
Instructions on how to access the printer's main menu via touch or keys.
Provides an overview of the main categories within the printer's LCD menu.
How to set printer parameters like Command Set (TSPL/ZPL2).
Details settings available for the TSPL command set.
Details settings available for the ZPL2 command set.
Describes sensor calibration procedures for media detection.
Overview of interface settings like Serial, Ethernet, Wi-Fi, Bluetooth.
Configuration options for the RS-232 serial communication interface.
Configuration and status for the Ethernet network interface.
Configuration options for Wi-Fi network settings.
Configuration options for the Bluetooth wireless interface.
Access to advanced printer settings like language, security, and cutter type.
Tools for managing files and memory on the printer.
Tools for diagnosing printer issues, including print head and sensor status.
How to build and manage a list of frequently used settings.
Lists common problems, their causes, and recovery procedures.
Methods and tools for cleaning and maintaining the printer.
Information on regulatory compliance and certifications for the product.
Crucial safety instructions for operating and handling the printer.
Specific warnings and cautions regarding printer operation and components.
Warnings about RF exposure for Wi-Fi and Bluetooth operation.
Records changes made to the manual over time.
To Next Page