6.4 Sensor
This option is used to calibrate the selected sensor. We recommend calibrate the sensor before printing when changing the media.
Set the media sensor type and calibrate the selected sensor automatically.
In case Auto Calibration does not work, please use “Manual” function to set the paper length and
gap/bline size to complete the calibration setting.
Set sensor sensitivity in fixed or auto.
Set the maximum length for label calibration.
Set the minimum paper length and maximum gap/bline length for auto-calibratIon.
Menu Sensor
Auto Calibration
Gap
Black Mark
Continuous
Preprint
Manual Calibration Standard
Gap
Black Mark
Continuous
Threshold Detect
Auto
Fixed
Maximum Length
Advanced
Min. Paper
Max. Gap/Mark
To Next Page
Loading...
Need help?
General
