EasyManuals Logo
Home>TSC>Barcode Reader>MH261T Series

TSC MH261T Series User Manual

TSC MH261T Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
- v -
EN 62368-1
KN 32
KN 35
KN 60950-1
기기는 업무용(A ) 전자파적합기기로서 판매자 또는 사용자는 점을 주의하시기
바라며, 가정외의 역에서 사용하는 것을 목적으로 합니다.
GB 4943.1
GB 9254, Class A
GB 17625.1
A 级产品,在生活境中,该产品可能成无线电
这种下,可能需要用户对采取切可行的措施。
IS 13252(Part 1)/
IEC 60950-1
TP TC 004
TP TC 020
CNS 13438
CNS 14336-1
CNS 15663
IEC 60950-1
Important safety instructions:
1. Read all of these instructions and keep them for later use.
2. Follow all warnings and instructions on the product.
3. Disconnect the power plug from the AC outlet before cleaning or if fault happened.
Do not use liquid or aerosol cleaners. Using a damp cloth is suitable for cleaning.
4. The mains socket shall be installed near the equipment and easily accessible.
5. The unit must be protected against moisture.
6. Ensure the stability when installing the device, Tipping or dropping could cause damage.
7. Make sure to follow the correct power rating and power type indicated on marking label provided by
manufacture.
8. Please refer to user manual for maximum operation ambient temperature.
WARNING:
Moving parts, keep fingers and other body parts away.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TSC MH261T Series and is the answer not in the manual?

TSC MH261T Series Specifications

General IconGeneral
BrandTSC
ModelMH261T Series
CategoryBarcode Reader
LanguageEnglish

Related product manuals