TSC Printronix MB240 Series User Manual

13
2.3.3 Power-on Utilities
Power-on Utilities provides the basic functions and can be activated by below procedures:
Turn off the power > Hold the button > Open the power > Release the button depending on the color of the LED.
MB240/ MB340 Series: Power down and hold the PAUSE button to restart the printer.
MB240T/ MB340T Series: Power down and hold the right side of the Select Keys to restart the printer.
Sequences of the settings:
LED Colors
Functions
Amber
Red
(5 blinks)
Amber
(5 blinks)
Green
(5 blinks)
Green /
Amber
(5 blinks)
Red /
Amber
(5 blinks)
Solid
green
1. Sensor Calibration
(Gap / black mark sensor)
Release
2. Self-Test
(And enter dump mode)
Release
3. Factory Default
Release
4. Black Mark Calibration
Release
5. Gap Calibration
Release
6. READY
(Skip AUTO.BAS)
Release

TSC Printronix MB240 Series Specifications

General

Type	Industrial Barcode Printer
Resolution	203 dpi (8 dots/mm)
Media Type	Direct Thermal, Thermal Transfer
Communication Interface	USB, Serial, Ethernet
Interface	USB 2.0, RS-232, Parallel, Ethernet 10/100
Supported Barcodes	Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Interleaved 2 of 5, Codabar, PDF417, QR Code, Data Matrix
Scanning Method	Thermal Transfer/Direct Thermal
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)