TSC Printronix MB240 Series User Manual

53
6.5.2 Ethernet
Ethernet configures internal Ethernet configuration and checks the printer’s Ethernet module status, and reset the Ethernet module.
Item
Description
Default
Status
Check the Ethernet IP address and MAC setting status.
N/A
Config.
DHCP: On or OFF the DHCP (Dynamic Host Configuration Protocol) network protocol.
Static IP: Use this menu to set the printer’s IP address, subnet mask and gateway.
DHCP
Menu Interface Ethernet
Status
Config

TSC Printronix MB240 Series Specifications

General

Type	Industrial Barcode Printer
Resolution	203 dpi (8 dots/mm)
Media Type	Direct Thermal, Thermal Transfer
Communication Interface	USB, Serial, Ethernet
Interface	USB 2.0, RS-232, Parallel, Ethernet 10/100
Supported Barcodes	Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Interleaved 2 of 5, Codabar, PDF417, QR Code, Data Matrix
Scanning Method	Thermal Transfer/Direct Thermal
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)