TSC Printronix MB240 Series User Manual

76
8. Wipe off the adhesive, particles, or dust from the cutter blade and cutter gate.
9. After cleaning the cutter blade, close the upper bar for the cutter gate ensuring the upper bar clicks in place.
10. Close the printhead ensuring the printhead is firmly secured in place.
11. Turn on the printer. The cutter blade will automatically sink into the chassis of the cutter module.
Note: The image below shows that the cutter blade has sunk into the chassis after turning on the printer.

TSC Printronix MB240 Series Specifications

General

Type	Industrial Barcode Printer
Resolution	203 dpi (8 dots/mm)
Media Type	Direct Thermal, Thermal Transfer
Communication Interface	USB, Serial, Ethernet
Interface	USB 2.0, RS-232, Parallel, Ethernet 10/100
Supported Barcodes	Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Interleaved 2 of 5, Codabar, PDF417, QR Code, Data Matrix
Scanning Method	Thermal Transfer/Direct Thermal
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)