TSC Printronix MB240T User Manual

20
3.5 Loading Media in Peel-off Mode (Optional)
1. Open the media
cover and load the
media.
2. Install the label as indicated
and set printer mode to Peeler
Mode.
3. Release lever, pull
the label off about
650mm and
remove the label.
Remove several
labels to leave liner.
4. Feed the leading edge of
liner through the peel-off
module slot as indicated.

TSC Printronix MB240T Specifications

General

Type	Industrial Barcode Printer
Print Method	Thermal Transfer/Direct Thermal
Resolution	203 dpi
Max. Print Speed	6 ips
Max. Print Width	4.09" (104 mm)
Media Type	Label, Tag, Ticket
Media Core Diameter	1" (25.4 mm)
Ribbon Core Diameter	1 inch
Interface	USB, Serial, Ethernet
Power	100-240 VAC, 50/60 Hz
Supported Barcodes	Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Interleaved 2 of 5, Codabar, POSTNET, PDF417, QR Code, Data Matrix, MaxiCode
Operating Temperature	41°F to 104°F (5°C to 40°C)