TSC Printronix MB240T User Manual

53
6.5.2 Ethernet
Ethernet configures internal Ethernet configuration and checks the printer’s Ethernet module status, and reset the Ethernet module.
Item
Description
Default
Status
Check the Ethernet IP address and MAC setting status.
N/A
Config.
DHCP: On or OFF the DHCP (Dynamic Host Configuration Protocol) network protocol.
Static IP: Use this menu to set the printer’s IP address, subnet mask and gateway.
DHCP
Menu Interface Ethernet
Status
Config

TSC Printronix MB240T Specifications

General

Type	Industrial Barcode Printer
Print Method	Thermal Transfer/Direct Thermal
Resolution	203 dpi
Max. Print Speed	6 ips
Max. Print Width	4.09" (104 mm)
Media Type	Label, Tag, Ticket
Media Core Diameter	1" (25.4 mm)
Ribbon Core Diameter	1 inch
Interface	USB, Serial, Ethernet
Power	100-240 VAC, 50/60 Hz
Supported Barcodes	Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Interleaved 2 of 5, Codabar, POSTNET, PDF417, QR Code, Data Matrix, MaxiCode
Operating Temperature	41°F to 104°F (5°C to 40°C)