TSC Printronix MH261T Series User Manual

15
Loading path for media & ribbon
5. Pull label roll leading edge forward through the media guide bar, damper,
media sensor (green) and place the label leading edge onto the platen roller.
Adjust the rear label guide (green) to fit the width of the label. Move the media
sensor at the correct position.
6. Adjust the front label guide to fit the width of the label.
7. Close the print head mechanism.
8. Using the front display panel to calibrate the media sensor.
Rear label
guide
Black mark
sensor
Gap sensor

TSC Printronix MH261T Series Specifications

General

Brand	TSC
Model	Printronix MH261T Series
Category	Barcode Reader
Language	English