TSC T-300 Series User Manual

13
3.3.3 Loading the Media in Cutter Mode (Option)
1. Refer to chapter 3.3.1 to install the
label.
2. Lead the media through the cutter
paper opening.
3. Close the print head mechanism
and printer cover. Use the DiagTool
to set the printer for cutter mode by
selecting “CUTTER” option for
Post-Print Action setting then click
“Set” button to enable the cutter
mode. Press the FEED button to
test.
Note:
Please calibrate the gap/black mark sensor when changing media.

TSC T-300 Series Specifications

General

Brand	TSC
Model	T-300 Series
Category	Barcode Reader
Language	English