TSE PhenoMaster - Warnings and Labels on the System

10 PhenoMaster | Hardware Operating Instructions
Signal word
The signal word indicates the hazard seriousness.
DANGER
Will lead to death or severe injuries!
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
May lead to death or severe injuries!
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION
May lead to minor or moderate injuries!
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury.
Embedded safety message
This warning is used to indicate risks that could occur during handling sequences.
• Instructions with Dos and Don'ts
•
WARNING! Here the description of the hazard follows.
• Instructions with Dos and Don'ts….
In this case a warning is associated with operating steps that follow.
or
• Instructions with Dos and Don'ts
Instructions with Dos and Don'ts
WARNING! Here the description of the hazard follows.
• Instructions with Dos and Don'ts
In this case a warning is associated with the particular operating step that precedes it.
Notice
"Notice” is used to address damages not related to physical injury, e.g., property damage.
NOTICE - Rubber Stoppers
Rubber stoppers can be used for the leak test.
Do not use rubber stoppers during operation of the exposure system.
Additional information
Is used for application hints and useful information.
Warnings and Labels on the System 2.4.2.
In this section the warning information given on the components of the PhenoMaster system is
explained. The warnings on the components correspond to those in these instructions.
info@TSE-Systems.com www.TSE-Systems.com