TSE PhenoMaster - Notes for the User; Explanation of Symbols; Warnings, Safety Messages, and Symbols

Core Modules 9
Exclusion of warranty
The warranty becomes null and void…
• …if inspections and maintenance work are not performed at the specified intervals.
• …if device housings are removed by unauthorized personnel.
2.3. Notes for the User
Prior to the initial operation of the system, read these operating instructions carefully to ensure that
you can fully exploit the advantages of the system and to protect personnel, animals, and the
environment against possible damage:
• These operating instructions describe the TSE PhenoMaster system.
• Images in these instructions show standard devices; depending on the system specifications
these may differ from the devices actually supplied.
• The system is to be operated by qualified and suitably trained personnel only.
• If the system is to be operated with devices from other manufacturers, then these will be
described in separate instructions provided by the manufacturer of the particular device.
• Any repairs to the system must be performed by members of the Technical Service of TSE
Systems only, or by suitably trained and authorized expert personnel.
Test run
We recommend to perform a test run before the system is used for the first time in order to familiarize
yourself with its operation and to make the necessary settings for the particular series of experiments.
2.4. Explanation of Symbols
Warnings, Safety Messages, and Symbols 2.4.1.
The following section contains information about the use of the safety symbols and explanations
about how they are to be understood. Please read it through carefully and observe the described
measures in order to protect yourself and others from injury or death.
WARNING
Safety alert symbol Signal word
Indicates potential hazard Level hazard seriousness
Toxic substances
Identification of hazard
Health hazards by toxic substances.
Probable consequences of not avoiding the hazard
• In cases of doubt, take appropriate safety measures.
• Wear protective clothing, e.g., safety goggles, safety gloves.
Measures: how to avoid the hazard
*Blue-colored text passages provide short explanations.
Safety alert symbol
This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
info@TSE-Systems.com www.TSE-Systems.com