TSE PhenoMaster - Installation Drivers, Interface, Software; Interface Driver

To Next Page

To Previous Page

Core Modules 23

5. Installation Drivers, Interface, Software

Normally, the software is pre-installed by TSE so that the system is ready-to-use.

NOTICE - Config loss!

Overwriting of software may change settings. Software installed on PC is already pre-

configured for your system.

Without prior consulting TSE Service

, do NOT overwrite pre-installed software.

Without prior consulting your system administrator AND TSE, do NOT alter BIOS settings of PC!

5.1. Interface Driver

Drivers (PCIS-DASK) are designed for Windows7/Windows10.

Supplied on DVD.

Installation sequence

First install driver, then install hardware.

Number of drivers required

With PCI interfaces from ADLINKTech, it is sufficient to install a single appropriate driver for ALL

interfaces.

Driver version

For Windows7, >= v4.28 required.

For Windows10, >=v5.21 required.

• Double-click on "setup.exe"

• Press "Next".

info@TSE-Systems.com www.TSE-Systems.com