TSI Instruments AIRFLOW Instruments ProHood PH721 - Delete Sample Data; Select;Set a K-factor for a Tool

5
Chapter 2. Unpacking and Setting Up
This chapter describes unpacking and setting up (preparing) the Electronic Balancing Tool (EBT) or
ProHood
™ capture hood for use. Figure 3 shows a picture of the Model EBT720/PH720 with a velocity
matrix measuring the face velocity on a laboratory hood.
Figure 3: Model EBT720/PH720 with Velocity Matrix
Unpacking
As you unpack the instrument and accessories, check the components against your packing list. If any
parts are missing or damaged, notify us immediately. Tables 1 and 2 list available standard and optional
components.
Table 1: List of Standard and Optional Components
Item
Part No.
Models EBT720 and EBT721
Electronic Balancing Tools (Alnor)
EBT720
EBT721
Models PH720 and PH721 ProHood
™
capture hood (A
IRFLOW™
Instruments)
PH720
PH721
Carrying case, EBT720/PH720
1319378
Carrying case, wheeled hood kit, EBT721
1319379
AA-size NiMH battery, four required
1208048
Operation and Service Manual
1980497
Velocity Matrix Add On Kit
801090
Air Flow Probe
800187
Temperature Probe (A
IRFLOW™
Instruments)
800208
Temperature and Humidity Probe (A
IRFLOW™
Instruments)
800209
Temperature Probe (Alnor)
800188
Temperature and Humidity Probe (Alnor)
800189