Start-Up Report 25
Fume Hood Monitor Report
Hood Number and/or Location:
Model #: 8610 Vent Kit: □ Yes □ No
Traverse: (Face velocity information as left and in accordance with ASHRAE
110)
Sash position: inches above work surface
Minimum / Average / Maximum: __________ / __________ /
__________ feet/minute
Displayed Face Velocity: Sash full open
Sash stop
Sash closed
Calibration
Sensor Zero: □ Zeroed
Sensor Span: □ Spanned
Access Code: □ On □ Off
Configure
Low Alarm:
High Alarm:
Display Filtering:
Alarm Reset: □ Latched
□ Unlatched
Aud Disable: □ On
□ Off
Analog Out: □ 0–10V
□ 4-20mA
Net Protocol: □ Modbus
Net Address:
Access Code: □ On □ Off
Additional Hood Information: (Special
applications, configurations, etc.):
Other Comments:
To Next Page
Loading...
