CONTENTS 
 
HOW TO USE THIS MANUAL .......................................................................................... III 
PART ONE .......................................................................................................................... 1 
User Basics .................................................................................. 1 
The Instrument ............................................................................. 1 
Operator Panel ............................................................................. 2 
Alarms .......................................................................................... 3 
Before Calling TSI ........................................................................ 4 
PART TWO ......................................................................................................................... 5 
Technical Section ......................................................................... 5 
Software Programming ................................................................ 6 
Menu and Menu Items ................................................................. 8 
Calibration .................................................................................. 13 
Maintenance and Repair Parts .................................................. 15 
APPENDIX A .................................................................................................................... 19 
Specifications ............................................................................. 19 
APPENDIX B .................................................................................................................... 20 
Network Communications .......................................................... 20 
Modbus Communications .......................................................... 20 
APPENDIX C .................................................................................................................... 22 
Wiring Information ...................................................................... 22 
Wiring Diagram .......................................................................... 23 
APPENDIX D .................................................................................................................... 24 
Start-up Report .......................................................................... 24 
APPENDIX E .................................................................................................................... 26 
Access Codes ............................................................................ 26 
 
How to Use This Manual 
 
The EverWatch
®
 Operation and Service Manual describes how to operate, configure, 
calibrate, maintain and troubleshoot the Model 8610 EverWatch Face Velocity Monitor.  
The manual is divided into two parts.  Part one describes the EverWatch unit and how to 
interface with the device. This section should be read by users, facilities staff, and 
anyone who requires a basic understanding of how the device operates. 
 
Part two describes the technical aspects of the product which include operation, 
configuration, calibration, maintenance and trouble shooting. Part two should be read by 
personnel programming or maintaining the unit. TSI recommends thoroughly reading this 
manual before changing any software items. 
 
Note:  This operation and service manuals assumes that the EverWatch monitor has 
been properly installed. Refer to the Installation Instructions if there is any 
question as to whether the EverWatch monitor has been installed properly.