To Next Page

To Previous Page

TallyMan V1.81 on

Installation

Default IP

The default IP parameters of TSL Tallyman controllers are:

IP Address: 192.168.205.121

Subnet Mask: 255.255.255.0

Connection for configuration purposes is via a PC running TallyMan, available for download from the

TSL website www.TSL.co.uk

Initial setup

Connect a PC running a terminal program (Hyper terminal/Putty/Tera Term Pro for example) to the

Maintenance Port, Port 3 on the TallyMan controller.

HyperTerminal Settings

Questions and Answers:

Need help?

Do you have a question about the TSL Tallyman TM1 and is the answer not in the manual?

TSL Tallyman TM1 Specifications

General